ADSL-Router, configured as a bridge (to set back to router, use the values in the right hand column)

Menu 1
                    Route IP= No 				>yes
                    Route IPX= No
                    Bridge= Yes 				>no


Menu 4
                    ISP's Name= ISP
                    Encapsulation= RFC 1483    			>PPOE
                    Multiplexing= LLC-based
                    VPI #= 8
                    VCI #= 35
                    Service Name= N/A
                    My Login= N/A
                    My Password= N/A
                    Single User Account= No
                    IP Address Assignment= N/A
                      IP Address= N/A
                    ENET ENCAP Gateway= N/A


Menu 11.1

Rem Node Name= ISP                   Route= None             >IP
     Active= Yes                          Bridge= Yes        >no

     Encapsulation= RFC 1483              Edit PPP Options= N/A
     Multiplexing= LLC-based              Rem IP Addr= N/A
     Incoming:                            Edit IP/IPX/Bridge= No
       Rem Login= N/A
       Rem Password= N/A
     Outgoing:                            Session Options:
       My Login= N/A                        Edit Filter Sets= No
       My Password= N/A                     PPPoE Idle Timeout(sec)= N/A
       Authen= N/A                          PPPoE Service Name= N/A

--------------------------------------------------------------------------------------

Zywall / Prestige 3x
Menu 4
   ISP's Name= ISP
   Encapsulation= PPPoE
     Service Type= N/A
     My Login= user@isp.ch                      [Only need this for routing mode]
     My Password= ********				[Only need this for routing mode]
     Idle Timeout= 0

   IP Address Assignment= Dynamic
     IP Address= N/A
     IP Subnet Mask= N/A
     Gateway IP Address= N/A
   Single User Account= Yes